Sunday, December 26, 2010

new heating plan . . .

Since the chalkboard work is still continuing, I had to come up with a heating plan for the wood shop.  For weeks now it has been really cold.  Like 7 in the mornings and in the 20's during the day.  I was having to go out in the shop at night after supper for a couple of hours, and spend a little time as well on the weekends out there.  When I had orders for chalkboards, I found myself out in the wood shop completely bundled up and working on them dreading the chill.  (I have been using a hair dryer to heat the paint cans up so they will spray nicely, and every now and again using a propane burner to take the edge off the cold) It has not been great to use the cold, steel table saw, or to wear gloves while I am trying to sand small edges on the boards.

So I decided to come up with a heating plan!  A plan that would utilize some of the things I had here at home, and if I needed to purchase anything, it would be minimal.  First was the stove.  I had a wood burning stove that I bought last year and used in the house until the wood cook stove came in.  I was storing it in the foyer planning on building a fireplace sometime.  Since it wasn't being used yet, I decided to use it out in the shop to keep the place a little warmer, and to help the paint dry on the chalkboards. I picked up some stainless steel stovepipe from an Amish friend of mine, and then had another metalworker make some mounting brackets for me.  I spent just under $60.00 for all the stuff.  I had some older stovepipe that I was going to be using on the inside, and also needed to purchase a couple of more things at the home improvement store in town.  I ripped some of the insulation off the ceiling in the garage and tore off the flammable paper backing for some insulation around the thimble that passes through the wood wall.  And out in the horse barn I found some sheet galvanized steel that I cut, painted, and applied to the wall as a "flashing" of sorts.  

This is what I came up with.  A pipe that runs up the side of the wood shop about 12 inches away from the wall.  I have been monitoring how hot it gets and even when the fire is RAGING in the stove, the brackets and the wall are still as cold as it is outside.  The pipe gets hot right as it comes out of the wall, but the further up it goes, the cooler it is.  And this is my new wood work shop area with a fire in it.  I start the fire around 9:00 am and by 10:00 the wood shop is a comfortable 60 degrees!  GREAT working temperature.

I told the children that I probably should have done this during the summer.  It would have been a little easier to work with the tools outside!  Hey . . . I am still on the learning curve.  :)

1 comment:

LauraT said...

Your ingenuity is inspiring! Way to go!